It is used to insulate and cover the suspended ceilings . industrial buildings , air-conditioning channels and it is used in industrial buldings for sound absorbing and preventing vibration and etc.

Asia slag wool company, considering to its. policy, which is based on the use of internal possibilities and on the employment of experts, has paced toward country's independence and self-sufficiency. the major purpose of this company has been the protection and best use of energy for producing heating and chilling insulations which is one of the most important needs of industries such as petrochemical plants, refineries, power houses, machinist industries, building and installation.

During the process and stages of producing iron from the blast furnace steel plant, melting slag is discharged from the upper part of furnace and transferred to the slag

factory, and them changed to the solid slag in the special tubs equipped with water jet injections ; this solid slag is transferred to Asia slag wool company as a raw materials. one of the most important characteristics of this material is approximately permanent chemical analysis. this permanency of the composing elements creates productions with least changes. availability of elements with high melting point such as aluminum oxides, magnesium, silica and calcium in chemical compound of Asia slag wool implies on its stability and endurance in high temperatures.        

1-Due to its low silica, this product shall never cause silicosis, nor any skin damage.

2-It is usable up to 750 °C and its melting point is 1300 °C.

3-Conductivity and coefficient of thermal conductivity: This coefficient show thermal conductivity, and whatever gets lower its  insulation power grows higher. Asia slag wool insulators having low thermal conductivity and preventing heat transfer, keeps warm environment warm and cold environment cool. Diameter of fibers in the insulation is the important factor in thermal coefficient of transition that the insulations of this company have very low thermal conductivity coefficient.

4-It is resistant against the most chemical materials and will not react with them.

5-It is a non conductor of electricity,  has no order, and will not be damaged after many years of storage.

6- sound characteristics:

The insulations of this company are suitable for sound absorption especially phono panel, which is produced in different thicknesses and specific weights. This insulations have an up advantage and benefit in the absorption and reduction of sound. Its sound absorption coefficient frequencies at 500 HZ is 0.8

7-Chlorine rate:

Among the elements, the rate of which in insulator must have a specific numerical standard is chlorine ion, because extra amount of this element causes the metal corrosion and joint surface to the insulator. chlorine rate in Asia slag wool products being cl<3 ppm is less than ''ASTM-C795'' standard that naturally voids any corrosion  effect.

8-PH or Acidity

One of the major characterizations of insulation is PH or acidity. if PH is less than 7.5, it makes the environment acidity and causes corrosion. Asia slag wool insulators having approximately 8-10 PH don't create these harms. 

 One of the possibilities of this factory is the chemistry laboratory for measuring the desirable indices in initial substance anal productive outputs.

Proportionate  amount of sio2 in Asia  slag wool insulation shows that these products are hairless for the environment and don't threaten the plants and animals life and  they are returnable to ecosystem. slag wool is one of the most harmless insulations and has the most adaptability to environment. in contrary to other  insulations, it doesn't  create any skin damage or allergy, Also it has adaptability to the whole building materials and its contact with them creates no problem.

Resin is used for producing heating and sound insulations in lSO. pipe, phono felt and phono panel. This product places at 250 °C and creates the products with different press, for making the links between fibers after the injection of the resin to the initial fibers.

After the versatility of fibers with the refractory string. the raw  wool is tailored to hexangular galvanized wire and it is produced  and used in different forms.   

It is used for insulation the flat and curved levels, the  pipes with large diameter. furnaces, boilers tall chimneys , and the exhaust of turbines and hothouses.

ISO blanket thermal conductivity coefficient  

     ISO blanket thermal conductivity coefficient  

>> PHONO. Panel

Application: